WTI NPS-115 Guide de l'utilisateur télécharger pdf (Page 81)

5-54

Basic Configuration

 PlugGroupAccess: Determines the default Plug Group Access setting for

new TACACS users. For more information on Plug Groups, please refer to

Section 5.6. (Defaults; Administrator and SuperUser = All Plug Groups On,

User = All Plug Groups Off, ViewOnly = All Plug Groups Off.)

Notes:

• In order to use this feature, you must first define at least one Plug Group as

described in Section 5.6.

• Administrator and SuperUser level accounts will always have access to all

plug groups.

• User Level accounts will only have access to the plug groups that are

defined via the Plug Group Access parameter.

• ViewOnly accounts are not allowed to invoke switching and reboot

commands.

 ServiceAccess: Selects the default Service Access setting for new TACACS

users. Determines whether each account will be able to access command mode

via Serial Port, Telnet/SSH or Web. In addition, the Service Access setting also

determines whether each account will be able to employ the Outbound Access

function. (Default = Serial Port = On, Telnet/SSH = On, Web = On, Outbound

Access = Off.)

Note: If Outbound Access has been disabled via the Network Parameters

menu, then the Service Access parameter will not be allowed to grant Outbound

Access to new TACACS users.

 ServiceAccess: Selects the default Service Access setting for new TACACS

users. The Service Access setting determines whether each account will be able

to access command mode via Serial Port, Telnet/SSH or Web. For example,

if Telnet/SSH Access is disabled for an account, then the account will not be

able to access command mode via Telnet or SSH. (Default = Serial Port = On,

Telnet/SSH = On, Web = On.)

 Current/PowerMetering: (VMR Only) Selects the default enable/disable

status for the Current/Power Metering setting. When Current/Power Metering is

disabled, an account will not be able to view current or power readings or display

current or power history. Note that in order for accounts to be able to display

these logs, Current and Power Metering must be enabled via the Systems

Parameters menu as described in Section 5.3. (Default = Off.)

Note: Current and Power Metering functions are not available on NPS units.

• PingTest(PingTACACSServers): Allows you to ping IP addresses or domain

names that have been defined via the TACACS Parameters menus in order to check

that a valid IP address or domain name has been entered.

Notes:

• In order for the Ping Test feature to function, your network and/or firewall

must be configured to allow ping commands.

• In addition to the Ping Test feature, the /TEST command in the Text Interface

or the "Test" option in the Web Browser Interface can also be used to ping

any user defined IP address in order to make certain that the IP address is

responding.

1 2 ... 76 77 78 79 80 81 82 83 84 85 86 ... 173 174

Commentaires sur ces manuels

Pas de commentaire

WTI NPS-115 Guide de l'utilisateur Page 81

Commentaires sur ces manuels

Produits connexes et manuels pour Commutateurs de réseau WTI NPS-115